Headland Spreading To Border - Boqballe EX Manual

EX(W)
Trend
HEADLAND spreading, TO BORDER
The BOGBALLE machine can by means of a cable switch
.....be changed to HEADLAND spreading – without leaving the tractor cab.
This way you have a very user friendly system – which ensures at the same time optimum
headland spreading.
While spreading on HEADLAND the NORMAL settings of the machine are retained
– except:
THE ROTATION DIRECTION OF THE SPREADING DISCS
≡
The back side of the vane is used
+
ALWAYS STOP PTO when changing the rotation
direction!
PTO- SPEED
QUANTITY SETTING / SPEED
At spread widths from 19 to 36 metres the quantity is NOT reduced.
•
It must be considered that the fertiliser when spreading on HEADLAND – will to a higher extent
than in NORMALspreading – be thrown forwards in the driving direction.
The rotation direction is changed so that the spreading discs rotate "away from
centre".
(See FUNCTION OF SPREADING VANE / Trend SYSTEM) Is done manually or by cable.
The PTO speed is reduced in order to limit the spread width.
There is a direct connection between the PTO speed and the HEADLAND spread
width.
The higher PTO speed – the wider HEADLAND spread width.
This means in practice that it is possible to "choose" the required HEADLAND
spread width – depending on the wish of spreading FULL quantity TO BORDER, or
if a REDUCED quantity TO BORDER is required.
patterns , og
The quantity is reduced either by reducing the outlet (setting system) or by
increasing the forward speed. The quantity is changed in comparison to the PTO
speed.
(Only at spread widths from 12-18 m).
).
,
with border to the right in the driving direction.
(option)
(Only at spread widths from 12 to 18 metres).
STOP
(See examples of HEADLAND spread
26
:
Standard transmission
HEADLAND rotation direction.
Is turned CLOCKWISE!
TURN IT COMPLETELY
AGAINST STOP !