Setting Of Quantity - Boqballe EX Manual

EX(W)
Trend
QUANTITY SETTING,
If case the machine is not equipped with CALIBRATOR, the quantity setting is made
on the basis of the instructions in the spread chart.
It must be noted that the spread chart is only a guide, because the quantity spread
depends on the exactness of the driving speed and the tramline distance, but also of
the quality of the fertiliser in question.
The fertiliser will change character according to temperature, air humidity and often
varies with each delivery.
If an exact quantity is required (Kg/Ha), it is recommended to CALIBRATE the
machine by use of the BOGBALLE rate check kit.
CHECK KIT")
The quantity (Kg/Ha) is set by the setting handle of the
machine.
The setting system is equipped with a scale and a scale stop
with stepless movement – and fixed in the inverval from 0 to 9
and with "marks" for each 0,25 scale step.
The example shows the scale stop set to "0", corresponding to
a closed outlet of the machine.
NB !
Vane type:
E-1
corresponds to
E-2
corresponds to
E-6
corresponds to
Example: 12 Km/h
Scale = 2,5
98 Kg/Ha
Tilt = 3°
Refer to the appropriate chart for the material to be spread for the settings required.
Spread chart / Internet:
Spread
width
Chart
number
E1 T
(L/R)
E2 T
(L/R)
E6 T
(L/R)
Scale
setting
Kg/Ha
www.bogballe.com
(See the paragraph "USE OF RATE
Vane type
24 – 305
Kg/Ha
Km/h
8 10 12
24 19 16
1,0
53 42 35
1,5
94 75 63
2,0
147 118 98
2,5
206 165 137
3,0
Spread chart
Såtabel
16
Vane
position
1-2
E-2
Kg/min
±
cm
14
14 7,7 3 4
30 16,9 3 4
54 30,1 3 4
84 47,1 3 4
118 66,0 2 3
Tilt
angle (°)
Km/h