Spreading System - Boqballe EX Manual

EX(W)
Trend

SPREADING SYSTEM

The BOGBALLE spreading system is base on an Integrated Center System – ICS, where
the spreading discs of the machine during NORMAL spreading – rotate against each other
– and spread in a radius of 180°, with a 100 % overlap.
This means in practice that right and left spreading disc form two opposite spread patterns –
overlapping each other.
+ =
Each spreading disc spreads the full spreading width. That means that the fertiliser from the
two spreading discs A and B – overlap each other. The spread width is for almost all types
of fertiliser twice as wide as the distance between the tramlines.
This way you achieve a 4-double overlap – which ensures a most even distribution of the
fertiliser.
As shown in the diagram the spreading is made from the
present tramline – to the middle of the next two tramlines.
The spreading system is developed in such a way that you
are able to spread the fertiliser with a minimum of
machine setting.
This means in practice that you get a uniform distribution – no matter
which type of fertiliser and without special settings.
The BOGBALLE machine is therefore only equipped with one setting
handle – for setting the quantity.
The spreader's ICS system
includes the special X-deflector.
This deflector will help ensuring
an optimum distribution and
overlap at large spread widths.
The passage of the fertiliser
through the X-deflector will
result in a small amount of dust building – dependant on the quality of the fertiliser –
because the X-deflector functions as a wind tunnel.
This will not influence the eveness of the distribution.
9