Machine Settings / Normal And Late Application; Pto- Speed - Boqballe EX Manual

EX(W)
Trend
GENERAL GUIDANCE FOR MACHINE SETTINGS

PTO- speed,

TILT- angle
WORKING HEIGHT, Standard
WORKING HEIGHT, Late application
WORKING HEIGHT, Chassis kit
QUANTITY SETTING
VANE / SPREAD WIDTH, Position
In the following you will find a more thorough explanation for the different settings.
PTO- SPEED
NORMAL spreading
Excl. HEADLAND spreading
540 rpm.
When spreading fertilisers with low grain strength (< 2,0 kg), the
In such cases the PTO speed will be indicated in the spread chart
The machine has however at spread widths lower than 24 metres and when spreading
granular fertilisers, so much "power surplus", that deviations of ± 5 %
will have no serious influence on the spreading result.
565 rpm.)
REMEMBER !!
Consider a "slow / smooth" START of the tractor PTO - with the tractor idling!
ALWAYS STOP THE TRACTOR PTO – WHEN CHANGING THE
Check that the PTO has a correct length
transmission
MACHINE SETTINGS
NORMAL spreading
:
540 rpm.
PTO speed is lowered to 450 rpm.
for the fertiliser in question.
ROTATION DIRECTION !
Check that the PTO has a correct length!
– in order not to damage the transmission!
POS.
in order not to damage the
13
540 rpm.
See chart
(°)
75 cm
Max. cm
cm
100
See chart Kg/Ha
1-2
HEADLAND spreading:
See instruction conc.
"HEADLAND SPREADING"
(between 515 and