Table of Contents
Advertisement
MOD TW100
MENU
DMX MODE ADDR:001~512
DMX MODE CHAN:3/4/5/8/9
DMX MODE NO:BLACK
DMX MODE NO:HOLD
DMX MODE NO:AUTO
DMX MODE NO:MANUA
DMX MODE DELAY:0~4
SLAVE MODE
MANUAL CW:000~255
MANUAL WW:000~255
MANUAL AMBE::000~255
MANUAL STROB:00~15
SOUND PRO:01~08
SOUND SENS:00~08
JUMP RUN SNAP:01~08
JUMP RUN SPEED:01~16
FADE RUN SNAP:01~08
FADE RUN SPEED:01~16
AUTO RUN FAD+SNAP
AUTO RUN SPEED:01~16
CLR MACS COLOR:00~32
CLR MACS STROB:00~15
OPTION BLGT:ON
OPTION BLGT:OFF
OPTION IR:ON
OPTION IR:OFF
OPTION SYSRESET
ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 17
Sets the DMX starting address
Set the unit DMX channels
When DMX signal is lost or interrupted,the unit will default to BLACKOUT option.It will
switch all LED's off
When DMX signal is lost or interrupted,the unit will default to HOLD option.It will hold the
last state before signal was lost.
When DMX signal is lost or interrupted,the unit will default to AUTO option.It will run the
internal programs.
When DMX signal is lost or interrupted,,the unit will default to the manual color setting
Select the unit delay mode
Set the unit into slave mode
Adjust the intensity of the cool white
Adjust the intensity of the warm white
Adjust the intensity of the amber white
Adjust the flash speed,00 is flash off,01 is slowest,15 is fastest
Select the 8 sound active modes
Adjust the sound active sensitivity level,00 is sound active off,01 is the lowest level,8 is
highest level.
Select the 8 color change modes
Adjust the speed of the color change mode
Select the 8 color dreaming modes
Adjust the speed of the color dreaming mode
Select the auto run mode
Adjust the speed of the auto run mode
Select the 32 static colors
Adjust the strobe speed,00 is strobe off,01 is slowest,15 is fastest
LCD backlight always on
LCD backlight will be off after 20 seconds
IR remote function on
IR remote function off
Initialize the unit at the extra factory setting
DESCRIPTION
System Menu
Advertisement
Table of Contents
