Table of Contents
Advertisement
MFD Message
Reason
No Signal
Make sure that the vessel is
(NoSignal)
outdoors with a clear view of the
southern sky.
Make sure the Antenna is mounted
according to the instructions in this
manual.
Move your vessel away from any
area which obstructs the antenna.
Check Antenna
Make sure that the antenna cable
(Chek Antenna,
is firmly and securely plugged into
CHK Antena, Chek
the BBWX4 Receiver.
Ant)
Make sure the antenna cable is not
bent or broken.
Turn the MFD off, then on, to
reset this message. If the message
persists, most likely the antenna
cable has been damaged. Replace
the antenna.
Antenna
Check the antenna connection to
Disconnected
make sure it is fully plugged into
the BBWX4 Receiver.
Antenna Cable
Replace the antenna and antenna
Shorted
cable.
Check Tuner
Network Cable is not connected
(Chek Tuner, Chk
to the MFD or network switch.
Tunr)
Confirm that the cable is connected
to an MFD or network switch.
Channel Not
The channel you have selected is
Available (Chan
not available.
Unavailable, Ch
Unavailable, Ch
Unavail, Ch Unavl)
MFD Message
Reason
Channel Not
The channel you have selected
Subscribed (CH
is not part of your current
Unsubscribed,
subscription plan. First see our
Chan Unsub, Ch
Customer Agreement for complete
Unsub)
terms in the US at:
www.siriusxm.com/marine and then
call 1-855-796-9847 to subscribe,
and in Canada at
www.siriusxm.ca/marine and then
call 1-888-539-7474 to subscribe.
Waiting To
The BBWX4 receiver is connected
Establish
to the MFD network, but the
Connection
MFD has not yet established a
(Waiting to
connection.
Connect)
Furuno customer support
For support, please obtain the following information
using the product menus:
• Product name, Product identity, Serial number
• Software application version and System
diagrams.
Visit the Web customer support area at:
www.FurunoUSA.com for FAQs, servicing
information, and support.
Telephone support In the USA:
• Tel: 360-834-9300 West Coast
• Tel: 410-479-4420 East Coast
Advertisement
Table of Contents
