Converter Function - KTI Networks KGC-310M-C Installation Manual

C-tag: Tag with TPID 0x8100
S-tag: Tag with TPID 0x88A8
Priority C-tagged frame: Priority tagged frame with C-tag (TPID=0x8100, VID=0)
Priority S-tagged frame: Priority tagged frame with S-tag (TPID=0x88A8, VID=0)
>
VLAN C-tagged frame: Tagged frame with C-tag (TPID=0x8100, VID 0)
>
VLAN S-tagged frame: Tagged frame with S-tag (TPID=0x88A8, VID 0)
PVID (Port VID): PVID is the default VID of an ingress port. It is used in 802.1Q filtering for
untagged packets. It is also often used as [Default Tag - VID] for egress tagging operation.

3.2 Converter Function

The device supports the following data conversions between fiber cable and twisted-pair Cat.5 (copper)
cable:
The data rate on twisted-pair segment depends on the link speed finally established with the link
partner.
23