Installing The Server; Rackmount Kit - Fujitsu SPARC Enterprise T1000 Installation Manual

2
C H A P T E R

Installing the Server

This chapter provides instructions for installing the server in an equipment rack.
This chapter contains the following sections:
"Rackmount Kit" on page 11
■
"Installing the Server in a Rack" on page 12
■
"Removing the Server From the Rack for Service" on page 21
■
"Connecting the Server Cables" on page 21
■
Note – Ensure that you have all of the parts before you begin the installation of the
server.
Note – In this guide, references to left and right are from your viewpoint as you face
either the front or the rear of the system.

Rackmount Kit

The server rackmount kit includes two mounting slides, a slide spacing tool, and a
cable management bracket. The kit also includes two extension brackets for use with
racks up to 39.5 in. (1000 mm) in depth.
The mounting kit also includes an assortment of screws and nuts to fit various types
of racks. Extra screws and nuts are included.
11