Specifications - SSANGYONG Rodius 2013 Manual

1. SPECIFICATIONS

Item
Immobilizer
unit
Transponder
2. CAUTIONS
1. The vehicle owner must observe the service works when deleting the transponder codes or
registering additional keys.
2. In any cases, the immobilizer system can not be removed from the vehicle. If you attempt to
remove it and damage the system, starting will be impossible, so never attempt to remove,
damage or modify it.
3. The remote engine starter cannot be installed to the vehicle equipped with the immobilizer
system.
4. Do not drop or shock to the transponder in the ignition key as it may be damaged.
5. With a damaged transponder, the engine cannot be started.
6. For the vehicle with the immobilizer, there can be a problem in starting the vehicle or the system
error:
- When more than one immobilizer keys come into contact with (each) other(s) or key is close
to any device sending or receiving electromagnetic fields or waves
- When the ignition key is close to any electronic or electric devices such as lighting equipment,
security keys or security cards
- When the ignition key is close to a magnetic or metal object or a battery
Item
Operating voltage
(CAN)
Operating temperature
Coil inductance
Modulation method
Frequency
Frequency
Operating temperature
Transponder coding
7010-06
Specification
6.0 V to 16.0 V
(6.0 V ~18.0 V)
-30℃ ~ 80℃
420 uH ± 20 uH
FSK
(Frequency Shift Keying : frequency
displacement)
134.2 KHz ± 4 KHz
134.2 KHz ± 4 KHz
-40℃ ~ +85℃
Up to 5
03-3