Hazard Warning Flasher Switch; 4 Wheel Drive Switch; Using Cruise Control On Hills; Part Time 4Wd System - SSANGYONG MUSSO Owner's Manual

Using Cruise Control on Hills

How well cruise control works on hills de-
pends on the speed, load, and the steep-
ness of the hill.
When going up steep hills, you may have to
press the accelerator pedal to maintain your
speed. When going downhill, you may have
to brake or shift to a lower gear to keep your
speed down.
Applying the brake takes you out of cruise
control.
HAZARD WARNING FLASHER
SWITCH
To turn on the hazard warning flashers,
push the hazard warning flasher switch. All
turn signal lamps will flash simultaneously
with the hazard warning indicators.
Push this switch again to turn them off.
The switch can be operated with the igni-
tion on or off.
Use the hazard warning flasher to warn
other drivers when you stop or park under
emergency conditions, or when your vehicle
becomes a traffic hazard. Avoid stopping on
the road if possible.
INSTRUMENTS AND CONTROLS 3–27

4 WHEEL DRIVE SWITCH

The indicator light in the cluster will come on
according to the 4WD operation.

Part Time 4WD System

To operate the 4WD, push the switch to '4H'
or '4L'.
• 2H : 2-wheel drive, normal drive mode.
• 4H : 4-wheel drive high speed.
• 4L : 4-wheel drive low speed.
Full Time 4WD System
Push the switch according to road condition.
• 4H : 4-wheel drive high speed, normal
drive mode
• 4L : 4-wheel drive low speed