Terminal Block Tb5; Terminal Block Tb6; Grounding The Module - Honeywell H-S81-HS Manual

System Components

Terminal Block TB5

This terminal block is used to connect Input channels 9, 10, 11, 12, 13, and 14.
Pin
1
2
3
4
5
6
7
8
9
10
11
12

Terminal Block TB6

This terminal block is used only in the version embedded in the extinguishing module and is used
to connect the module to the display board.
Pin
1
2

Grounding the Module

The module must be connected to the system ground using the screw located on the front panel.
39
I/O Mode
Tag
Operating mode
+L9
Ch-9 line output
-L9
+L10
Ch-10 line output
-L10
+L11
Ch-11 line output
-L11
+L12
Ch-12 line output
-L12
+L13
Ch-13 line output
-L13
+L14
Ch-14 line output
-L14
Tag Function
+RS485 RS485 bus positive
-RS485 RS485 bus negative
Embedded Mode 1 Embedded Mode 2
Operating mode Operating mode
EV EV-Main
EV EV-Reserve
EV/TOA/TO EV-Main/TOA/TO
EV/TOA/TO EV-Reserve/TOA/TO
TOA/TO TOA/TO
TOA/TO TOA/TO
Safety Bus Manual — P/N LS10177-000HI-E:B 02/21/2019
SB-ECM Module
Embedded Mode 3
Operating mode
EV-Primary Discharge
EV-Secondary
Discharge
EV- Primary
Discharge/TOA/TO
EV- Secondary
Discharge/TOA/TO
TOA/TO
TOA/TO