Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
3.
Using a bolt (Q) and a plastic cap (R),
assemble the left and right handrail to
the upright tube.
4.
4.1
Slide the axle into the front bearing
assembly of the connector post. Attach
to the handrail using 2 machine screws
(M). Note: Screws must be secured
tightly on both sides to prevent the axle
from spinning inside of the bearing
housing. Repeat for opposite side.
4.2
Assemble the left and right handrail
covers to each handrail using 1 bolt and
nut for each side (L).
5
Advertisement
Table of Contents
