Advertisement
1.1 Site Survey <Step2> : Turn on Slave CS and
1. Insert AC adapter cable to another CSs (Assume this CS will be
(This Cell Station go into Site Survey signal receiver mode)
2.Place Slave CS closet to Site Survey
Master CS and confirm LED is slow
green flashing.
© Panasonic Corporation 2017
Confirm the coverage area
Master
Slave
LED Status:
Indications
Red and Green
alternate flashing
Slow green flashing
Slow amber flashing
Slow red flashing
Moderate Red flashing
It takes around a minute to be sync again, if
slave CS is not sync with master CS during
Red LED status.
Slave
CS).
Description
Site survey signal generator mode
(Site survey Master Mode)
Receiving site survey signal
condition is good
Receiving site survey signal
condition is not good
No find site survey signal (After
getting IP address)
No find site survey signal (Before
getting IP address)
8
8
Advertisement
