4.2 Tree Survey -By CS Maintenance Tool- <Step-> : Error Message
This step is no need if there is only 1 hop to master.
Please refer to "41-006" of technical contents on support site for causes other than the above.
When Tree survey uncompleted, you must click [Cancel].
* After clicking [Cancel], all CSs will restart automatically.
© Panasonic Corporation 2017
Display Error Message
"ERROR!!! CS does not have Primary CS.
Please move the CS(s) closer to Primary
CS according to site planning."
・Cause
A CS has radio signal trouble.
・Solution
Please check whether a radio signal obstacle,
such as a metal shelf, a door,
etc., exists near the CS.
(This is a rare case. But after site survey ,the radio
signal condition might be changed by
environmental change.)
"CS does not have Secondary CS."
・Cause
1) Secondary CS is not set .
2) CS number set as Secondary CS does
not exist in the group.
・Solution
1)Set Secondary CS manually if needed.
2)Set correct CS number of Secondary CS.
31
31