1.2 How to setup Maintenance mode and CS Area Check of the PS
How to setup Maintenance mode
4
1.Turn on the PS by pressing and holding the POWER/CANCEL key.
3-1
1
2
2. After turning on the PS, a blank screen will be displayed.
3-3
3. Press the left soft key, press [8],
3-2
4. Press OK.
How to setup CS Area Check mode
With registered PS
1. Enter "Maintenance mode".
(See above)
2. Select "CS Area Check",
and press "OK" twice.
Display during CS Area Check on the screen
© Panasonic Corporation 2017
At this time, press and hold the TALK/SP-PHONE key for about 8 seconds.
and then press [1].
1 ⇒2
With Un-registered PS
1. Turn on PS.
2. Press "MON." button.
3. Press "OK".
3 ⇒4
MON. MENU
OK
11
11