Monitoring An Internal Ied Fault; Monitoring Condition Monitoring Data; Measured And Calculated Values - ABB Relion 630 Series Operation Manual

Section 6
Operating procedures
6.1.1.3
6.1.1.4
6.1.2
68

Monitoring an internal IED fault

The flashing green LED indicates an internal IED fault. The fault messages are found
in the LHMI menu.
1. Select Main menu/Monitoring/Internal events or Main menu/
Monitoring/IED status to monitor the latest fault indication.
2.
Press or to scroll the view.
GUID-97CDE6AD-01D5-495E-A213-BFC70E89E145 V3 EN
Figure 49: Fault indication
The internal event list is not updated dynamically. To update the list,
leave the Internal events menu and then select it again.

Monitoring condition monitoring data

1. Select Main menu/Monitoring/I/O status/Monitoring.
2.
Press or to scroll the view.
With PCM600 the user can map output signals from condition monitoring related
function blocks to the appropriate destinations.

Measured and calculated values

All values show the momentary measurement value and some include demand values
calculated from a set period.
Measured and calculated values can be accessed through the LHMI, WHMI and
PCM600. Measured and calculated values are based on the RMS mode. These values
1MRS756509 E
630 series
Operation Manual