Using The Single-Line Diagram - ABB Relion 630 Series Operation Manual

Section 4
Using the HMI
4.1.10
40
GUID-A4E4C372-FE36-4CFE-829C-F602CE577E2A V1 EN
Figure 20: Function button panel
2. Press the wanted function button.
• Press the wanted function button to jump to a certain menu item.
The menu opens immediately upon pressing the button.
• Press the wanted function button for at least 0.5 s to initiate a control
signal. The action is taken once.
To repeat the action, press the button again. If the button is pressed less that
0.5 s, no action is taken.
3.
Press to close the function button panel.
The panel is also closed after pressing a function button configured for a menu
shortcut.
The function buttons are configured with PCM600.

Using the single-line diagram

The single-line diagram is created with PCM600.
1. Select Main menu/Control.
The single-line diagram view is displayed.
1MRS756509 E
630 series
Operation Manual