Editing Values - ABB Relion 630 Series Operation Manual

1MRS756509 E
4.2.6
630 series
Operation Manual

Editing values

1. Click the menu in the WHMI tree.
2. Click the submenu to see function blocks.
3. Click a function block to see the setting values.
4. Click Enable Write.
Some parameters, for example, the IED test mode, cannot be set
via the WHMI.
A071244 V2 EN
Figure 34: Enable writing to edit a value
The selected setting group is shown in the Setting Group drop-down list. The
active setting group is indicated with an asterisk *.
5. Edit the value.
• The minimum, maximum and step values for a parameter are shown in the
Min., Max. and Step columns.
•
Setting group values are indicated with
Section 4
Using the HMI
.
51