ABB Relion 630 Series Operation Manual page 29

1MRS756509 E
630 series
Operation Manual
Object control
If the control position of the IED is set to local with the R/L button, the IED can be
controlled using the object control buttons.
Object to be controlled is selected from the single line diagram.
Table 4: Object control push-buttons
Name Description
Closing the object.
Close
Opening the object.
Open
Navigation
The arrow buttons are used for navigation. To scroll information, press the arrow
button several times or simply keep it pressed down.
Table 5: Navigation push-buttons
Name Description
• Leaving setting mode without saving the values.
ESC
• Cancelling certain actions.
•
Adjusting the display contrast in combination with
•
Changing the language in combination with
•
Running the display test in combination with
•
Deleting a character in combination with
•
Inserting a space in combination with
• Entering parameter setting mode.
Enter
• Confirming a new value of a setting parameter.
• Confirming selection in dialogs and alarm panel.
• Moving up and down in menus.
Up
• Selecting objects in the SLD.
• Moving selection in dialogs and alarm panel.
Down
• Scrolling active digits of a parameter when entering a new setting value.
• Moving left and right in menus.
Left
• Selecting pages in the SLD.
• Changing the active digit of a parameter when entering a new setting value.
Right
• Activating the authorization procedure, when the user is not logged in.
Key
• Logging out, when the user is currently logged in.
Section 3
630 series overview
or .
or .
.
when editing a string.
when editing a string.
21