efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
Chapter 11: Typical Connection Diagram
11.1 Braking Resistor Unit
For Models GP5 23P7 to − GP5 27P5 (200 V Class 3.7 to 7.5 kW).
Models GP5 40P4 TP − GP5 4015 (400 V Class 0.4 to 15 kW).
=
The transformer is not necessary for 200V class.
When installing a DC Reactor (option), remove the common bar between ¾1 and ¾2 terminals (provided as
‡
standard) and connect a DC Reactor with the terminals.
#
When using the Thermal Overload Relay, set constant n070 to 0.
disabled.) If it is not changed, the Inverter may not stop within set decel time.
Firmware – S2011 and S3012
Revision: 1 (9/98)
GP5
Figure 54 Connection Diagram for Braking Resistor
80
(Stall Prevention selection during decel is
© Saftronics, Inc.