5.
Slide the Panel PC to "wall mount bracket 1" to attach the two brackets with the hooks.
Then tighten the screw to secure the assembly in place.
Chapter 6 Mounting Options
Chapter 6
Panel Mount
Screw
The panel mounting kit includes the following:
•
1.
2.
3.
26
Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
6 mounting clamps
Before starting any installation procedures, attach the poron foam to the Panel PC.
Select a place on the panel (or wall) where you will mount the system.
Cut out a shape on the panel that corresponds to the system's rear dimensions (272mm x
169mm) and ensure that the system can be fitted into the panel properly.
www.dfi.com