Table of Contents
Advertisement
Chapter 2 - Getting Started
Preparing the System
Before you start using the system, you need the following items:
•
AC power adapter
•
DVD-ROM drive (for installing software/drivers)
•
Screwdriver
Installing Devices
The following devices can be installed in the system.
•
Mini PCIe/mSATA cards
Configuring the BIOS
To get you started, you may need to change configurations such as the date, time and the
type of hard disk drive.
1.
Power on the system.
2.
After the memory test, the message "Press DEL to run setup" will appear on the screen.
Press the Delete key to enter the BIOS setup utility.
Installing the Operating System
Most operating system software is prepared using a DVD or bootable USB drive. Please refer
to your operating system manual for instructions on installing an operating system.
Installing the Drivers
The system comes with a software package including drivers. These drivers must be installed
to provide the best system performance. Refer to the Supported Software chapter for instruc-
tions on installing drivers.
Chapter 2 Getting Started
Chapter 2
10
Advertisement
Table of Contents
