Table of Contents
Advertisement
5
Mounting hole
Panel
4.
Insert the system from the outside surface of the panel into the mounting hole until it is
properly fitted against the panel.
5.
Position the mounting clamps along the rear edges of the system and insert them into the
slits around the system.
Chapter 6 Mounting Options
Chapter 6
272
210.50
6.
The first and second clamps must be positioned and secured diagonally prior to mounting
the rest of the clamps. Tighten the clamp's screw using an electric screwdriver by pressing
the white plastic cap onto the back of the panel. The illustration below shows that all
clamps are properly mounted.
27
www.dfi.com
Advertisement
Table of Contents
