DFI VP101-BT User Manual page 31

Fanless in-vehicle panel pc system with touchscreen
Hide thumbs Also See for VP101-BT:
Table of Contents

Advertisement

HW Monitor
This section shows system health information.
Case Open
Set this field to "Enabled" to allow the system to alert you of a chassis intrusion
event. Note that the chassis intrusion connector should be connected for this func-
tion to work.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section configures the CPU. It also displays the CPU information.
Active Processor Cores
Select "1" to use only one of the CPU's cores or "All" for all of the available cores.
Intel Virtualization Technology
Select "Enabled" to let the system utilize the hardware-assisted virtualization capabilities
provided by Intel
Virtualization Technology (Intel
®
EIST
Enable or disable the Enhanced Intel SpeedStep
the balance between system's power consumption and performance. After it is enabled in
the BIOS, you can enable the EIST feature using the operating system's power management.
31
VT) in a virtualized environment.
®
Technology (EIST), which helps optimize
®
www.dfi.com

Advertisement

Table of Contents
loading

Table of Contents