DFI VP101-BT User Manual page 32

SATA Configuration
This section configures SATA devices. It also shows the information about the installed
SATA drives.
Serial-ATA (SATA)
Serial-ATA Controller 0-1
Activate or deactivate the SATA controller.
Serial-ATA Port 0 and Port 1
Enable or disable Serial ATA port 0 and 1.
The SATA Port 0 controls the onboard SATA port.
The SATA Port 1 controls the Mini PCIe slot for mSATA (full size).
SATA Port HotPlug
Enable or disable hot-plugging for Serial-ATA port 0 and 1.
Chapter 7 BIOS Setup
Chapter 7
Network Stack Configuration
This section configures network stack settings.
When the Network Stack is enabled, the screen will display the following information:
Ipv4 PXE Support
When enabled, Preboot eXecution Environment (PXE) boot using IPv4 addressing
scheme will be supported. When disabled, the Ipv4 PXE boot option will not be sup-
ported.
Ipv6 PXE Support
When enabled, Preboot eXecution Environment (PXE) boot using IPv6 addressing
scheme will be supported. When disabled, the Ipv6 PXE boot option will not be sup-
ported.
PXE boot wait time
Enter the wait time value to abort PXE boot by pressing the "ESC" key.
32
www.dfi.com