Table of Contents
Advertisement
Installing a CANbus card in the Mini PCIe slot
To install a CANbus card, connect the cable between the card the pin headers (JP21 and JP22),
then you can use COM 4 as a CANbus port. For pin assignments for COM 4, refer to Chapter 5 ̶
Ports and Connectors. To switch signals for COM 4, refer to Chapter 4 ̶ Jumper Settings.
Mounting screw
Note:
The system also has one additional full-size Mini PCIe slot that provides mSATA
(SATA signals) interface.
Chapter 3 Installing Devices
Chapter 3
CANbus card
CANbus pin headers
COM 4/ 8-bit DIO/CANbus
13
www.dfi.com
Advertisement
Table of Contents
