Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
VersaLink® C8000, C9000
Physical Overview
1.
Paper feed tray.
2.
USB2.0(A).
3.
Touch screen user interface.
4.
Document output tray.
5.
Jam clearance panel.
6.
USB2.0(A).
7.
USB3.0(B).
Security Related Interfaces
Ethernet
Optional Wi-Fi Dongle
Rear USB 3.0 (Type B)
Front Panel Optional
USB2.0 (Type A) port(s)
Product Service Port
Encryption and Overwrite
Encryption
TPM Chip
Media Sanitization
November 2018
.
8.
9.
10. Foreign device interface.
11. AC Power.
12. Jam clearance panel.
13. Special paper tray.
14. Jam clearance panel.
10/100/1000 MB Ethernet interface.
Supports optional 802.11 Dongle.
USB target connector used for printing.
Note: This port can be disabled completely by a system administrator.
Users may insert a USB thumb drive to print from or store scanned files
to. (Physical security of this information is the responsibility of the user
or operator.) Note that features that leverage USB ports (such as Scan
To USB) can be disabled independently or restricted using role based
access controls.
Firmware upgrades may be applied using this port.
Connection of optional equipment such as NFC or CAC readers.
Note: This port can be disabled completely by a system administrator.
Used only by Xerox service technicians. Port is covered by a metal
plate.
AES-256
TPM chip is standard and cannot be disabled.
Immediate and On-Demand Image Overwrite.
RJ45 Ethernet connection.
Optional Wi-Fi dongle connection.
Page 47
Need help?
Do you have a question about the AltaLink B8045 and is the answer not in the manual?