Lincat Opus 800 Installation, Operating And Servicing Instructions
Electric griddles
Hide thumbs
Also See for Opus 800:
Table of Contents
Advertisement
Quick Links
Installation, Operating and Servicing
Instructions
Opus 800 Electric Griddles
OE8205, OE8206
Please make a note of your product details for
future use:
Date Purchased:_________________________
Model Number:__________________________
Serial Number:__________________________
Dealer:_________________________________
_______________________________________
IS 598 ECN 4326
Page 1 of 9
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lincat Opus 800
Summary of Contents for Lincat Opus 800
- Page 1 Installation, Operating and Servicing Instructions Opus 800 Electric Griddles OE8205, OE8206 Please make a note of your product details for future use: Date Purchased:_________________________ Model Number:__________________________ Serial Number:__________________________ Dealer:_________________________________ _______________________________________ IS 598 ECN 4326 Page 1 of 9...
-
Page 2: Table Of Contents
WARNING! This symbol is used whenever there is a risk of personal injury. CAUTION! This symbol is used whenever there is a risk of damaging your Lincat product. NOTE: This symbol is used to provide additional information, hints and tips. -
Page 3: Warnings And Precautions
WARNINGS AND PRECAUTIONS This appliance must be installed, commissioned and serviced by a qualified person in accordance with national and local regulations in force in the country of installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person. -
Page 4: Installation And Commissioning
INSTALLATION AND COMMISSIONING This product is heavy; prior to installation a handling assessment should be made. This appliance must be earthed. An equipotential bonding terminal is provided to allow cross bonding with other equipment. Connect the terminals as follows: Green and Yellow wire Earth Blue wire Neutral N Brown wire... -
Page 5: Operating Instructions
Error: No reference HERWISE STATED REVISION No Error: No reference TITLE Error: No reference Plates Error: No reference 16 LINCAT LTD, SHEET Error: No reference DRG No CREATED 23/02/2016 1 OF 1 ROAD, LINCOLN, LN6 3QZ Spread approximately 2kg of household salt evenly over the plate. Turn the appliance on full. -
Page 6: Cleaning
Your Lincat product has a manufacturer’s warranty. This requires you to maintain and care for your product and follow maintenance instructions. If you fail to maintain your unit or damage components Lincat may charge you for a warranty repair. Please check the website for terms and conditions. -
Page 7: Servicing, Maintenance And Component Replacement
For stubborn deposits use a fine metal bristled brush to loosen deposits. Do not damage the surface with the edge of the scraper or nicks will form, allowing debris to collect. Do not use sharp implements on chromium plates. Do not use plastic implements for cooking. General cleaning Clean all panels with warm water and mild detergent, do not use abrasive materials or cleaners containing chlorine. -
Page 8: Fault Finding
Remove the relevant control knob. Remove the facia panel as above. Disconnect the cables from the faulty thermostat; remove the screws which hold the thermostat to the control panel. Undo the screws that hold the thermostat bulb bracket to the cartridge and remove the thermostat bulb from the bracket. -
Page 9: Service Information And Guarantee
Type number All available on serial plate Serial number Lincat reserve the right to carry out any work under warranty, given reasonable access to the appliance, during normal working hours, Monday to Friday, 08:30 to 17:00. GUARANTEE This unit carries a comprehensive UK mainland 2 year warranty. The guarantee is in addition to, and does not diminish your statutory or legal rights.
Need help?
Do you have a question about the Opus 800 and is the answer not in the manual?
Questions and answers