Specifications - Martin VDO Atomic Dot User Manual

Specifications

Physical Fixture
Width including hanging bracket ..................................................................... 175 mm (6.9 in.)
Height.............................................................................................................. 138 mm (5.4 in.)
Depth............................................................................................................... 146 mm (5.7 in.)
Fixture center to center using interlock couplers (vertical and horizontal) ..... 150 mm (5.9 in.)
Weight ................................................................................................................ 2.2 kg (4.9 lb.)
Physical PDE Junction Box
Width ................................................................................................................. 94 mm (3.7 in.)
Height................................................................................................................ 50 mm (2.0 in.)
Depth............................................................................................................... 106 mm (4.2 in.)
Weight ................................................................................................................ 0.5 kg (1.1 lb.)
Dynamic Effects
Strobe......... 0.289 – 16.557 Hz, variable flash rate, intensity and duration (inc. blinder mode)
Aura.........................................................................................RGB control per pixel, 16 pixels
Built-in FX............ Various pre-programmed effects on Strobe, Aura and combination of both
Control and Programming
Control protocols .......................................................................DMX, RDM,Art-Net, sACN, P3
Protocol detection ..................................................................................................... Automatic
DMX channels......................................................................................................... 1/3/4/19/64
Setting and addressing ............................................................................................RDM or P3
Fixture identification ........................................................................... User settable ID number
DMX compliance...........................................................................................USITT DMX512 A
RDM compliance................................................................................. ANSI/ESTA E1.20 RDM
Art-Net compliance .....................................Art-Net 1, 2, 3 and 4, including RDM over Art-Net
sACN compliance .......................................................................................ANSI E1.31 – 2016
Martin P3 Compliance......................................P3 System Controller Software 5.1.0 or newer
DMX/RDM Transceiver ................................................................................................. RS-485
Ethernet Transceiver................................................................................................10/100Mbit
Firmware update ..................................................................via DMX using Martin Companion
................................................................. or via Ethernet using P3 System Controller
P3 Video Processing
Color resolution .......................................................................16 bit per color (48 bit per pixel)
Color temperature control .........................................................................2000-11000K (Aura)
Color Gamut Control ...................................................................... full spectrum control (Aura)
Synchronization..................................................................................................... system-wide
Frame Rate ................................................................................................up to 75 frames/sec
Brightness Control ..........................................................0-100% (maintaining full color depth)
Gamma Correction and Control .......................................................................fully controllable
Control / User Interface
Device status.......................................................................................... Multi-color status LED
Device test and reset ......................Pushbutton to call up local test patterns and reset device
Optics and photometric data
Beam/Strobe LED VDO Atomic Dot CLD
Max. total lumen output.........................................................................................3600 lumens
Beam angle .......................................................................................... 11 degrees (half peak)
Field angle....................................................................................22 degrees (one-tenth peak)
Color temperature ........................................................................................................... 5700K
Resolution .........................................................................................................................16-bit
Minimum LED lifetime .............................................50 000 hours (to >70% luminous output )*
Martin VDO Atomic Dot user guide 45