Martin VDO Atomic Dot User Manual page 9

9.6 m
0.2 m 1.0 m
(7.9 in.) (39.4 in.) (31.5 ft.)
DO NOT RISK GROUP RISK GROUP
RISK GROUP
1
USE 2
EXEMPT
The luminaire should be positioned so that prolonged staring into the luminaire at a
distance closer than 1 m is not expected.
Protection from injury
Fasten the fixture securely to a fixed surface or structure when in use. The fixture
is not portable when installed.
Ensure that all supporting structures, surfaces, fasteners and lifting equipment can
bear the weight of all the devices they are intended to support plus an adequate
safety margin, and that they conform to local building and safety regulations.
Ensure that any accessory such as gel frames, gobo holders are securely
fastened.
Block access below the work area and work from a stable platform whenever
installing, setting, adjusting, or cleaning the fixture.
Do not operate the fixture with missing or damaged covers, shields or any optical
component.
If an operating problem occurs, stop using the fixture immediately and disconnect it
from power. Do not attempt to use a fixture that is obviously damaged.
Martin VDO Atomic Dot user guide 9