PTT
4.2
Operation
The PTT Peltier Thermostating Unit can be easily operated due to the intuitive one-knob operation and
clear visual feedback.
Standard situation (after switch-on and in operation)
(ERROR)
New settings are automatically accepted after approx. 3 seconds and the device then resets to the adapted
standard operating situation.
YAME0020 / 30.06.11
Heating phase / Cooling phase
Set-point tem-
perature is
being set:
0...80 °C
Installation and operation
Display corresponds to ACTUAL temperature
Flashes during
stirrer operation
Magnetic stirrer
activated / deactivated
Stirrer speed is being
set;
Display:
1 (slow) ... 9 (fast)
15