Status Blocks; Reader_Status - Siemens Simatic Ident Function Manual
Rfid systems ident profile and ident blocks, standard function for ident systems
Hide thumbs
Also See for Simatic Ident:
- System manual (362 pages) ,
- Function manual (122 pages) ,
- Operating manual (80 pages)
Table of Contents
Advertisement
Setting parameters for blocks
3.4 Programming Ident blocks
3.4.4
Status blocks
3.4.4.1
Reader_Status
The "Reader_Status" block reads status information from the reader or communications
module (RF18xC, "CM configuration_1") module. For the various reader families, there are
different status modes that you can select using the "ATTRIBUTE" parameter.
Figure 3-30
Table 3- 36
Parameter
ATTRIBUTE
IDENT_DATA
58
"Reader_Status" block
Explanation of the "Reader_Status" block
Data type
Byte
Any / Variant
Default values
Description
B#16#81
Identifier of the status modes / possi-
ble entries:
RF200: 0x81
•
RF300: 0x81, 0x86
•
RF620R, RF630R: 0x87, 0x88,
•
0xA0, 0xA1
RF61xR, RF68xR: 0x89
•
RF185C, RF186C, RF188C: 0xA2
•
MOBY U: 0x81, 0x84, 0x85
•
MOBY D: 0x81
•
0
Event values depending on attributes
Note:
You create either an "Array_of_Byte"
or a variable with one of the following
data types.
Other data types / UDTs can also be
created for "Any".
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
Hide quick links:
Advertisement
Table of Contents
