Reset_Univ - Siemens Simatic Ident Function Manual

Parameter
PARAM_SET
CHANNEL_PLAN
MULTITAG
ISTM
SCANNING_MOD
E
Is not currently possible with the Ident blocks.
1)
3.4.3.7

Reset_Univ

The "Reset_Univ" block is a universal reset block with which all identification systems can be
reset. Use this block only after consulting Support.
Figure 3-29
Table 3- 34
Parameter
PARAM
Table 3- 35
Byte
Value
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
Data type
Byte
Byte
Byte
Bool
Bool
"Reset_Univ" block
Explanation of the "Reset_Univ" block
Data type
Array [1...16] of Byte
Structure of the "PARAM" parameter
1 2...5 6 7...8
0x04 0x00 0x0A 0x00
Default values Description
0 Field_ON_Control
(0 = fast; range of values: 0x00, 0x02)
0F Field_ON_Time
(range of values: 0x00 ... 0x0F; ETSI
only)
1 Maximum number of transponders
that can be processed at the same
time in the antenna field.
(Range of values: 0x01 ... 0x50)
False True = activate intelligent single tag
mode
False True = activate scanning mode
Description
Data for reset frame
The data to be set here can be made available
by Support when necessary for special settings.
9 10 11
scan- param option_
ning_ 1
time
Setting parameters for blocks
3.4 Programming Ident blocks
12 13...14 15
dis- No. of field_
tance_ tran- on_
limiting spond- control
ers
1)
16
field_
on_
time
57