Siemens Simatic Ident Function Manual page 80

Setting parameters for blocks
3.5 Programming the Ident profile
Parameter
EXT_UHF
LEN_ID
MEM_BANK
PSWD
EDIT_BLACKLIST_MODE
INVENTORY_DURATION
INVENTORY_DUR_UNIT
LOCK-TAG-
BANK_ACTION
LOCK-TAG-BANK_MASK
80
Data type Default val-
ue
STRUCT --
BYTE B#16#0
BYTE B#16#3
DWORD DW#16#0
BYTE B#16#0
WORD W#16#0
WORD W#16#0
WORD W#16#0
WORD W#16#0
Description
Structure for additional parameters (RF61xR/RF68xR
only)
Length of the valid data in the "EPCID_UID" field.
Memory bank on the transponder
0x00 = RESERVED
•
0x01 = EPC
•
0x02 = TID
•
0x03 = USER
•
Password for transponder access
0x00 ≙ no password
Mode
0x00 = add TagID
•
0x01 = add all "Observed" transponders
•
0x02 = delete TagID
•
0x03 = delete all
•
Duration
Period of time or number of inventories or number of
"Observed" events
Example:
0x00 ≙ no inventory
•
0x01 ≙ one inventory
•
Unit for "DURATION"
0x00 = time [ms]
•
0x01 = inventories
•
0x02 = Number of transponders that reach the "Ob-
•
served" state
Lock-Action (see "EPC Specification")
Lock-Mask (see "EPC Specification")
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04