Related Manuals for StarTech.com ST121SHD50
Summary of Contents for StarTech.com ST121SHD50
- Page 1 HDMI® Over Cat 5e/6 Extender | 50m Actual product may vary from photos User Manual SKU#: ST121SHD50 For the latest information and specifications visit www.startech.com/ST121SHD50 Manual Revision: 04/24/2019...
-
Page 2: Compliance Statements
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual... -
Page 3: Safety Statements
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda. • Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 4: Table Of Contents
EDID Configuration ................11 Auto EDID Configuration ........................12 Manual EDID Configuration (EDID Copy/EDID Ghost) ..............12 EDID Factory Default Setting ........................ 13 DDC Pass Mode ............................14 LED Indicators ..................14 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 5: Product Diagram
Product Diagram Top View LED Indicator EDID Copy Button LED Indicator EQ Selector To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 6: Front View
Front View LINK OUT A (RJ-45 Connector) LINK OUT B (RJ-45 Connector) LINK OUT A (RJ-45 Connector) LINK OUT B (RJ-45 Connector) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 7: Rear View
Rear View Power Jack Port HDMI In Port Power Jack Port HDMI Out To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 8: Introduction
User Manual x 1 • Requirements Requirements are subject to change. For the latest requirements, please visit www.startech.com/ST121SHD50. Video Device HDMI® enabled video source device (i.e. computer, Blu-ray • Player) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 9: Installation
Receiver Unit is situated near an available AC electrical outlet. Make sure all devices are turned off before beginning installation. Hardware Installation Position the Transmitter Unit near the video source (i.e. Computer, Blu-ray Player). To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 10 (i.e. router, switch). Connect the other end of the Cat5e/6 cable (from LINK OUT A) to the LINK IN A (RJ-45 connector) on the Receiver Unit. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
-
Page 11: Operation
For example, if using a 1.8M (or 3.0M) HDMI cable, a CAT5 cable and a display with resolution of Full HD (1920 x 1080), you may adjust video according to its CAT5 cable length as follows: To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 12: Edid Configuration
If you are experiencing poor resolution or inconsistent audio or video output, you can specify EDID settings or copy EDID settings using the EDID button. The EDID Copy function To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 13: Auto Edid Configuration
Connect a Cat5e/Cat6 Cable (sold separately) to the Link Out A port on the Transmitter. Connect the other end of the Cat5e/Cat6 Cable to the Link In A Port on the Receiver. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 14: Edid Factory Default Setting
Follow the instructions in the Hardware Installation section to connect the Transmitter to the Receiver. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 15: Ddc Pass Mode
*Emit blue with green flashing configured twice HDMI EDID content *Emit blue with green flashing configured three times HDCP syncing **Purple Status Receiver Video Linking ***Steady Blue Video unlinking Steady Red To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 16 Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
- Page 17 StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.