Installation - Siemens SINAMICS Series Equipment Manual

6.3.5

Installation

Required tools:
• Torx screwdriver T20
• Flat-bladed screwdriver 1 (0.5 – 3.5)
Table 6-13 Installing the DC link adapter for a 150 mm module
Unlock and open the protective cover.
Secure the adapter (1.8 Nm).
Note:
By moving the adapter housing, the DC link adapter can be fitted on either the left-hand or
right-hand side of the module. This is possible with Active Line Modules as of 55 kW; see
overview below.
Equipment Manuel for Booksize Power Modules
Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
Unscrew the screws.
The 24 V adapter is installed
and the protective cover is closed.
Options
6.3 DC link adapter
6-31