Weco cad III Operation Manual page 33

3H
8
7
9
4 5 6
1 3
2
0
7.
8.
BLOCK
9.
3H
R/L
10.
% Use the cursor and <8> and <2> horizontal
to allign the decentration point on the display with the
decentration point on the foil.
The decentration values " u " and " v " are displayed.
% Press.<lower table> key.
•
Remove the foil adapter.
•
Put the lens in the lens holder.
% Use the <BLOCK> key to position the table in the parallax free
zone.
The lens illumination is now activated.
% Allign the decentration point of the lens with the decentration point on
the display.
% Check the blank diameter.
•
Place the Vario block with block pad in the block adapter.
•
Position the blocking device over the lens
The lens is blocked automatically.
% Press <R/L> key for the left lens.
The left lens is displayed. The decentration data of the right lens
is applied.
•
Commence as under point 5.
<4> and <6> vertical
33