Technical Data / Performance Standards - Weco cad III Operation Manual

3.6 Technical data / Performance standards

12
Manual`s applications range:
Operation of CAD 2000 in WECO CMS (CL-operation) with form tracer
and edger and memory card SM200.
Technical Data
Width
Depth
Height
Weight
Operating voltage
Power consumption
Allowed ambient temperature for operation
Allowed storage temperature:
Allowed humidity (relative humidity)
Connections and interfaces
The standard version of the CAD 2000 includes interfaces for current
loop (CL) and RS232 operation. For RS232 operation CAD Blocker
software is required. This software is not standard See operation mode
RS232 below.
Current loop interface (CL):
Operation mode: for operation a WECO Form Tracer and an edger with
SM200 memory board is required.
Interface with RS232:
Operation as RS232 terminal. For operation CAD Blocker software
(EPROM), cable and connection to PC program Optolab IV are required.
This operation manual is not valid for the interface operation mode
RS232..
200 mm
430 mm
335 mm
10 kg
220/230 V 50 Hz (other voltages on request)
50 W
15 - 30 °C
:
5 - 40 °C
: 35 - 85 %