Application - Weco cad III Operation Manual

5.2

Application

18
The <ENTER> Key
The <ENTER> Key must be pressed after all data input.
The cusrsor will jump to the next input field.
When you exit the last input field the decentration value is calculated.
When the <ENTER> key is pressed for more than one second the
calculation is applied.
Dual entry
In entry field "b", DBL, you can enter two values:
Values below 30mm:
Values over 30 mm:
Corrections
With the <C> key you can delete values at the cursor position and the
error message will disapear.
Display "b" For DBL
Display „m" for frame PD