Operation For Proressive Lenses With Foils - Weco cad III Operation Manual

6.4 Operation for Proressive lenses with foils

NEW JOB
1.
MODE
2.
3H
7 8
9
4 5 6
2
1 3
0
3.
% Press <NEW JOB> key.
% Press <MODE> key to select lens mode
Display " P "
(Display " M "
(Display " S "
Note: Only press <MODE> key when the required lens
mode is not yet in operation.
% Enter the form number on key pad.
The form number is the same number that was entered in the
tracer during the tracing process.
Range of job numbers with memory card SM 200:
Range of job numbers with Optolab IV:
Progressive with folis
Multifocal lens)
Single Vision)
1 - 234
1 - 999999
31