Operation For Bifocal- Or Trifocal Lenses - Weco cad III Operation Manual

6.3 Operation for Bifocal- or Trifocal lenses

NEW JOB
1.
MODE
2.
CALCU
3.
8
2
4.
CALCU
5.
7 8 9
4 5 6
2
1 3
0
6.
% Press <NEW JOB> key.
% Press <MODE> key to select lens mode.
Display " M "
(Display " S "
(Display " P "
Note:
% Press <CALCU>key to select decentration menu.
NUM
LED-Display in <NUM CUR> key lights up.
CUR
Norte:
% Use <8> or <2> key to select required menu.
For decentration menu: see enclosed.
% Use <CALCU> key to end the decentration menu selection
NUM
CUR LED-display in <NUM CUR> key turns off.
Note:
% Enter the form number on the key pad
The form number is the same number that was entered into the
tracer during the tracing process..
Range of job numbers with memory card SM200:
Range of job numbers with Optolab IV:
Multifocal lenses
Single vision)
Progressive with foils)
The <MODE> key should only be used when the
required lens mode is not yet in use.
The <CALCU> key should only be used when the
required menu is not yet in use.
The selected decentration menu stays in operation
when machine is switched off.
1 - 234
1 - 999999
29