Protocol Modbus Interface Commands - Moxa Technologies NPort S9000 Series Manual

NPort 9000 Series CLI
2.3.4

Protocol Modbus Interface Commands

From the CLI root directory, use the "configure" command to enter configure mode, and use the "interface
serial protocol modbus " command to enter the Modbus protocol folder. In this folder, user can set all Modbus
protocol settings.
2.3.4.1 init-delay
To configure the initial delay of the Modbus.
Commands
init-delay mili-seconds
Syntax
Description
Defaults
Permission
Usage
Guidelines
Examples
2.3.4.2 send-tcp-exception
To configure the send TCP exception of the Modbus.
Commands
send-tcp-exception
no send-tcp-exception
Syntax
Description
Defaults
Permission
Usage
Guidelines
Examples
2.3.4.3 tcp-listen-port
To configure the listen TCP port of the Modbus protocol.
Commands
tcp-listen-port listen-tcp-port
Syntax
Description
Defaults
Permission
Usage
Guidelines
Examples
init-delay
Configure initial delay for the Modbus protocol
The default is 0
Admin group
listen-tcp-port: 0 - 30000
NPort S9650I-16-2HV(config)# interface serial protocol modbus
NPort S9650I-16-2HV(config-modbus)# init-delay 1000
send-tcp-excepti
Configure enable or disable send TCP exception for the Modbus protocol
on
The default is disable
Admin group
listen-tcp-port: 1 - 65535
NPort S9650I-16-2HV(config)# interface serial protocol modbus
NPort S9650I-16-2HV(config-modbus)# send-tcp-exception
NPort S9650I-16-2HV(config-modbus)# no send-tcp-exception
tcp-listen-port Configure the listen TCP port for the Modbus protocol
The default is 502
Admin group
listen-tcp-port: 1 - 65535
NPort S9650I-16-2HV(config)# interface serial protocol modbus
NPort S9650I-16-2HV(config-modbus)# tcp-listen-port 1234
2-78
Commands