Snmp-Server Read-Write-User; Snmp-Server Read-Only-User - Moxa Technologies NPort S9000 Series Manual

NPort 9000 Series CLI

2.2.14 snmp-server read-write-user

To configure a read-write privileged user and its authentication type and password to a Simple Network
Management Protocol (SNMP), use the snmp-server read-write-user global configuration command.
Commands
snmp-server read-write-user username auth {no-auth|md5|sha} password
Syntax
Description
Defaults
Permission
Usage
Guidelines
Examples

2.2.15 snmp-server read-only-user

To configure a read-write privileged user and its authentication type and password to a Simple Network
Management Protocol (SNMP), use the snmp-server read-only-user global configuration command.
Commands
snmp-server read-only-user username auth {no-auth|md5|sha} password
Syntax
Description
Defaults
Permission
Usage
Guidelines
Examples
snmp-server Configure SNMP server
read-write-user SNMP read-write privileged user setting
username The name of the read-write privileged user
auth Specifies which authentication level should be used
auth-type no-auth | md5 | sha
password Password (maximum 30 characters)
N/A
Admin group
Username: max 16 characters
Password: max 16 characters
NPort S9650I-16-2HV(config)# snmp-server read-write-user admin auth md5
moxacli
snmp-server Configure SNMP server
read-only-user SNMP read-write privileged user setting
username The name of the read-only privileged user
auth Specifies which authentication level should be used
auth-type no-auth | md5 | sha
password Password (maximum 30 characters)
N/A
Admin group
Username: max 16 characters
Password: max 16 characters
NPort S9650I-16-2HV(config)#snmp-server read-only-user user auth md5
moxacli
2-15
Commands