Setting The Marker Display; Setting The Viewfinder Screen Display - Sony PDW-F335KL Operating Instructions Manual

Situation
The shutter speed and mode
setting has been changed
The black or white balance
has been adjusted
1) The corresponding message is also displayed for about 3 seconds when the
SHUTTER switch is set to ON.

Setting the Marker Display

You can switch the display of the center and safety zone
markers on or off and select whether the area indicated by
the safety zone marker is 80%, 90%, 92.5%, or 95% of the
screen area.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the MARKER page of the USER (or
OPERATION) menu, and press the MENU knob.
For details on menu operations, see "Basic Menu
Operations" on page 129.
2
Select the desired setting item, and press the MENU
knob.
You can set the following items on the MARKER
page.
Item
MARKER
CENTER
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT Selects the type of the aspect
3
Turn the MENU knob to select the desired setting, and
press the MENU knob.
4
Repeat steps 2 and 3 until you have set all of the
desired items.
136
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Message to appear
SHUTTER: 1/100 (or 1/125,
1/250, 1/500, 1/1000, 1/2000,
1)
ECS, SLS)
E.g. WHITE: OK
Description
If you want no markers to be
displayed, set to OFF.
To display the center marker, set
to ON.
To display the safety zone, set to
ON.
Selects the safety zone area.
To display the aspect marker, set
to ON.
marker. (14:9/13:9/4:3)
Setting the Viewfinder Screen
Display
You can make settings for viewfinder screen display
functions.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the VF SETTING page of the USER
(OPERATION) menu, and press the MENU knob.
For details on menu operations, see "Basic Menu
Operations" on page 129.
2
Select the desired setting item, and press the MENU
knob.
You can set the following items on the VF SETTING
page.
Item Description
ZEBRA Turns the zebra display ON or
OFF.
ZEBRA SELECT Selects ZEBRA 1, ZEBRA 2 or
BOTH.
ZEBRA 1 DET. LVL Adjusts the level of the ZEBRA 1
display (30% to 107%). (Factory
default setting is 70%.)
PEAKING For viewfinder image adjustments
VOL.LINK made with the PEAKING control,
switches between linkage (ON)
and no linkage (OFF) of peaking
adjustment and detail level
adjustment.
H DETAIL LEVEL Adjusts the H detail of the
viewfinder image.
V DETAIL LEVEL Adjusts the V detail of the
viewfinder image.
DETAIL FREQ Turns the VF detail function on or
off and adjusts the frequency.
(NORM/HIGH)
VF ASPECT Selects the viewfinder aspect ratio
(AUTO/4:3).
1) When you use the viewfinder which is not equipped with a ZEBRA
switch, turns the display on or off using this item. When you use the
viewfinder with a ZEBRA switch, the switch operation and the
operation of this menu are both effective (the most recent operation
prevails).
2) When the VF ASPECT item is set to AUTO, this is linked to the
setting of the "ASPECT RATIO (DV)" item on the FORMAT page.
3
Turn the MENU knob to select the desired setting, and
press the MENU knob.
4
Repeat steps 2 and 3 until you have set all of the
desired items.
1)
2)