Sony PDW-F335KL Operating Instructions Manual page 128

ADVANCED menu
No. Page Item
07 SD DETAIL SD DETAIL
SD DETAIL LEVEL
SD CRISPENING
SD DTL LIMIT
SD LEVEL DEPEND
SD DTL
FREQUENCY
SD DTL H/V RATIO
SD CROSS COLOR
08 WHITE WHITE SHADING CH
SHADING SEL
VIDEO OUT SEL
R WHT H SAW
R WHT H PARA
R WHT V SAW
R WHT V PARA
WHITE SAW/PARA
09 BLACK BLACK SHADING CH
SHADING SEL
VIDEO OUT SEL
R BLK H SAW
R BLK H PARA
R BLK V SAW
R BLK V PARA
BLACK SAW/PARA
MASTER BLACK
MASTER GAIN(TMP) –3 / 0 / 3 / 6 /
10 DCC DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME
128
Menu Organization and Operation
Settings Default USER
setting menu
page
ON / OFF ON –
(–99 to +99) 0
R / G / B R –
VBS / R / G / VBS
B
(–99 to +99) 0
ON / OFF ON
R / G / B R –
VBS / R / G / VBS
B
(–99 to +99) 0
ON / OFF ON
(–99 to +99) 0
0dB
9 / 12 / 18 / 24
/ 30 / 36 / 42
dB
200% to 460% –
460%
(–99 to +99) 00
Description
Turn SD detail correction on or off. A
Sets the SD detail level.
Sets the SD crispening level.
Sets the SD detail limiter level.
Sets the SD level depend level.
Sets the SD H detail signal
frequency level.
Sets the SD V detail ratio.
Sets the amount of SD cross color
suppression.
Selects the channel adjusted with
this menu. If TEST is selected with
the output signal selector switch
(button) of a remote control unit,
the setting matches that of VIDEO
OUT SEL.
Selects the signal output from the
VIDEO OUT connector.
H SAW white shading correction
H PARA white shading correction
V SAW white shading correction
V PARA white shading correction
Turns white shading SAW/PARA
correction on or off.
Selects the channel adjusted with
this menu. If TEST is selected with
the output signal selector switch
(button) of a remote control unit,
the setting matches that of VIDEO
OUT SEL.
Selects the signal output from the
VIDEO OUT connector.
H SAW black shading correction
H PARA black shading correction
V SAW black shading correction
V PARA black shading correction
Turns black shading SAW/PARA
correction on or off.
Adjusts the master black level.
Temporarily adjusts the master
gain value.
Sets the dynamic range applied
when DCC is on.
Adjusts the DCC minimum knee
point.
Adjusts the gain vs. the DCC
detected value.
Adjusts DCC reaction speed.
File
A
A
A