Advertisement
Test Operation
Follow the procedure below after the installation work
has been completed.
1. Insert the power plug into the outlet.
Confirm that the power LED on the SpaLet
2.Check the front and
back cleansing spray.
(1) Check the cleansing operation.
1) With your forearm resting on the
SpaLet seat, press the Cleansing
button.
The spray automatically stops two
minutes after the switch is turned on.
2) When the nozzle extends, cover the
tip of the nozzle with your hand to
catch the spray.
3) Press the [Stop] button to stop the
cleansing spray.
(2) Perform the same check using the
front cleansing spray function.
STOP
Stops rear cleansing,
front cleansingand
drying operations.
STOP
Stops rear cleansing,
front cleansingand
PULSATING
drying operations.
When pressed during
rear cleansing,
provides a massage
effect by alternating
PULSATING
the spray strength
between high
When pressed during
and low.
rear cleansing,
provides a massage
effect by alternating
POWER
the spray strength
Controls the power
between high
for the seat.
and low.
POWER
WATER TEMP.
Controls the power
for the seat.
Adjusts the temperature of
the front and rear cleansing
water.
WATER TEMP.
Adjusts the temperature of
the front and rear cleansing
water.
SPRAY STRENGHT
Adjusts the water
pressure during rear
and front cleansing.
SPRAY STRENGHT
Adjusts the water
pressure during rear
and front cleansing.
SEAT TEMP.
Adjusts the toilet seat
temperature.
SEAT TEMP.
Adjusts the toilet seat
temperature.
®
seat unit is lit.
Power plug
Power plug
Power indicator
Power save indicator
*Due to the seat sensor function, the product's
back cleansing, front cleansing and deodorizer
will not operate unless you touch the seat.
*Due to the seat sensor function, the product's
DRYER
back cleansing, front cleansing and deodorizer
Dries the user after
will not operate unless you touch the seat.
cleansing.
DRYER
Dries the user after
cleansing.
POWER SAVE
Conserves energy by
lowering the toilet seat
temperature.
POWER SAVE
-17 - EN-
Conserves energy by
lowering the toilet seat
temperature.
Seat sensor switch
Seat sensor switch
CAUTION
When removing the filter, be sure to
close the water shut-off valve. When
attaching the filter, firmly tighten it
until the end of the filter is hidden in
the SpaLet seat unit.
* Water will leak from the filter.
End
Filter
Advertisement
