Advertisement
5. Install the SpaLet
unit water supply hose
(junction fitting side)
(1) Remove the protective cover from the end
of the SpaLet seat unit water supply hose,
and insert it in the junction fitting.
CAUTION
• Be careful not to damage the O-ring.
* Water may leak if the O-ring is broken or damaged.
(2) As with the body side, fit the clip on the hose
and junction fitting and lock it. Turn it to make
sure it is fastened securely.
• Fit the clip by engaging its ends until a click is
heard.
* Loose fitting may cause water leakage.
seat
®
-14 - EN-
Junction
Fitting
Clip
O-ring
SpaLet seat unit
Water Supply
Hose
Protective
Cover
O-ring
SpaLet seat unit Water Supply Hose
Clip
Clip
Bend
Junction Fitting
Advertisement
