Advertisement
4. Installation of the SpaLet
Installation diagram
CAUTION
• When installing the SpaLet
seat, make sure to use the
parts provided in the
installation kit.
SpaLet seat
(2) Install the slide plate onto the toilet bowl.
1) Insert the bushings
into the seat mounting
holes.
Bushings
Seat mounting
holes
(3) Install the SpaLet seat.
1) Place the SpaLet seat on the toilet bowl and
align the
mark on the mounting plate with the
mark on the rear section of the SpaLet seat.
2) Slightly raise the front side of the SpaLet seat,
slide it until the slide plate is fully inserted,
and then press the locking lever to secure the
SpaLet seat.
Mounting plate
SpaLet seat
Seat mounting bolts
Washer
Mounting brackets
Mounting plate
Bushing
Toilet seat mounting guide holes
2) Insert the mounting
bracket into the
mounting plate and
use the mounting bolts
to attach the slide
plate to the toilet bowl.
Mounting bolts for the SpaLet seat
Washer
Mounting
brackets
Mounting
plate
2
1
-13 - EN-
seat
®
(1) Remove the existing
seat.
1) Remove the nuts from
the seat mounting bolts,
the slip washers, and
rounded packing.
2) Raise the seat and
remove it by lifting the
seat mounting bolts.
Seat mounting bolts
Nut
Loosen
References
• Some toilet seats may
require different methods of
removal that differ from our
example.
• The removed toilet seat
should be stored in your
home in case you remove
the SpaLet seat.
Existing seat
Rounded packing
Slip washer
Advertisement
