Advertisement
Checking the toilet bowl
1. Measure the size of the toilet bowl.
Depending on the size of the toilet bowl, it may
not be possible to mount this product on it.
Make sure the toilet bowl's dimensions are as
shown in the figure on the right.
2. Conditions for using SpaLet
unit water supply hose (included)
The length of the SpaLet seat unit water supply
hose included with this product is 37.40" (950
mm), but a length of 31.50" (800 mm) from the
junction fitting to the SpaLet seat unit's water
supply socket is appropriate. (Refer to the figure
on the right)
seat
®
-8 - EN-
5.51" to 6.18"
(140 to 157 mm)
15.35" (390 mm)
or less
1.97" (50mm) or more
18.50" (470mm) or more
31.50" (800 mm)
or less
Advertisement
