Advertisement
Installation
1. Required tools
Have the following tools for installing this
product: adjustable end wrench, Phillips head
screwdriver, flat-blade screwdriver.
2. Install the junction fitting
(1) Close the toilet water shut-off valve fully.
(2) Flush the toilet and empty all the water
from the toilet tank.
(3) Place a wash bowl or other container
underneath the tank water supply hose.
Then loosen the box nut on the toilet tank
inlet side and remove it.
CAUTION
• Be careful not to damage the tank water supply hose.
(4) Place the packing in the junction fitting
box nut and connect the toilet tank inlet
to the junction fitting.
CAUTION
• Do not overtighten the nut.
(5) Insert the packing in the tank water
supply hose box nut and connect the tank
water supply hose to the junction fitting.
CAUTION
• Do not overtighten the nut.
Tank Water Supply
Hose
Water
Shut-off
Valve
Packing
Junction Fitting
Tank Water
Supply Hose
Water
Shut-off
Valve
-11 - EN-
Bowl Cock Side Box Nut
Close
Tank Inlet
Box Nut
Packing
Advertisement
